BS EN 752 Compliant Derby Catch-pits
Registered Design - 011945775-00
Derby GRP Catch-pit System
The Derby Catch-pit Frame was designed and developed to not only be used as an alternative to PCC catch-pit frames when being used with Aqua’s preformed GRP sump units, but to be an alternative solution to the traditionally built PCC catch-pit system; this would typically comprise 3no. base slabs combined with a selection of raising frames, ½ frames and lid/ cover of some type, latterly blue grated GRP.
The Derby system can either be installed comprising individual frames or with the lowest frames factory processed into a single piece (Deepdale) using a chopped glass fibre strand & polymer resin mix.
Derby Catch-pit Frames can be used in a variety of ways:
- In combination with preformed sump units.
- As a stand alone modular system - Modular Derby.
- As a factory manufactured formed sump unit with modular raising frames. - Deepdale Derby.
- As a factory formed single piece chamber - Deepdale Derby.
Manufactured to suit a range of applications, Derby profile is pultruded in two different depths (115 mm and 225 mm) in a maximum of 5m lengths to enable the construction of catch-pits and manholes quickly and easily.
Derby profiles are formed in to a variety of different sized frames (standard sizes or BS EN 752 compliant sizes) or they can be used to manufacture bespoke sizes to suit project specific requirements.
Product Technical Data
Restricted Content: Please Login to Access Product Technical Data